Traynor YVM-1 Conversion to Guitar Amp Suggestions

[misterc57]

Hey Folks

I want to convert this amp to a guitar amp and looking for suggestions.

This amp has (2) EL34 and (4) 12AX7 and huge iron.

I plan to remove the four back panel input jacks and the first two volume pots (change those first two pots to a hi and low input). Remove outputs 3 and 4 and only have two output jacks.

I'm thinking maybe do a preamp similar to a JCM800 4010. I may be able to bypass V1.

I want to make the most use of what is there and not go crazy with changes. Is this as simple as modifying the input jacks or is there more stage coupling considerations?

Schematic attached of Traynor and JCM800

Thoughts and suggestions please!

Thank you.

Marshall-JCM800-50W-4010-Schematic.pdf

[Jon Snell]

It is already a guitar amp. I would enjoy the powerful sound .. or
Use a pedal to get distortion, if that is what you want.

[Chuck H]

It is already a guitar amp. I would enjoy the powerful sound .. or
Use a pedal to get distortion, if that is what you want.

It's actually a four channel PA with a universal effects loop and tone stack. Much could be changed to make it more like a typical guitar amp.

[Chuck H]

I built a guitar amp from one of those once but I did a full gut job on it. The stages aren't arranged anything like what we know as guitar amps so while you do have the tubes, sockets, chassis, transformers, etc. and they are already mounted it's my opinion that that is all you have. Which isn't a bad start. so you can choose just about any design that your tube compliment will handle.

[mozz]

Convert 2 channels to cathode bias and make some jumpers.

[Pedro Vecino]

I find the eq quite extravagant. The one on the Ampeg Portaflex (right) is much better centered.

[Helmholtz]

I don't think a flat response is desirable with guitar amp.

[Pedro Vecino]

The center position I show is just the starting point. The movement of the bass and treble curves and their relationships also seems quite strange to me on that amp.
On the Orange 80, 120, etc., while it doesn't have the linearity of the Portaflex in the center settings (that's a secondary thing for guitar) I find it more predictable and it is proven to work very well.
I don't know that amp but with that input configuration it suggests it's a PA amp (that's what led me to see how their equalization works).