Fishman SA330X

[Jazz P Bass]

Has anyone ever disassembled one of these?
It is nothing like the SA220.
I am attempting to get the preamp board out with no success.
The whole stick is one piece.
Other than the end caps, there are no screws.
I did remove all of the control nuts but when the board is pressed down it hits a long boss for the end cap screws.
I have no idea how to get the grill off. It looks like there are two screws that may hold the panel in.
I contacted Fishman but no response yet.

[drewl]

I think I worked on one, there are screws under the tape or cloth that's on the sides covering the screw holes for the speakers, those long strips on each side.

[52 Bill]

Does the grill slide out of the case extrusion, once the top end cap is removed?

[Jazz P Bass]

I think I worked on one, there are screws under the tape or cloth that's on the sides covering the screw holes for the speakers, those long strips on each side.

Yeah .
That's the 220.

[Jazz P Bass]

Does the grill slide out of the case extrusion, once the top end cap is removed?

The 330 uses a grill that is sprung in real tight.
I did hear back from Fishman.
They said that after removing the bottom cover, then the preamp panel should slide out.
Nope.
It is not budging.
I resoldered the jack & that fixed the issue.