Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Blues Jr. reverb problems!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Blues Jr. reverb problems!

    I'm trying to fix the reverb on my blues jr. that I got recently, and I'm have only a little bit of electronics experience. I've looked at other threads and help forums about the subject and am still stumped. I measured the resistance from the red rca jack to the circuit board and gave me 4.5k oms which I don't think is correct because I measured the black rca jack to the circuit board and it gave me near zero ohms. Its just a wire to the circuit board so it should give me near zero ohms right?

  • #2
    http://billmaudio.com/wp/?page_id=46

    http://billmaudio.com/wp/?page_id=34
    Warning! Some Electronics devices contain lethal voltages that can kill you. If you do not feel qualified to work with dangerous voltages, refer your repairs to a qualified technician. By giving you online advice, I am assuming no liability for any injury or damages you might incur through your own actions.

    Comment

    Working...
    X