Identify Ampeg PT Leads?

[obscure44]

I bought a new PT110V power transformer for my 60s Ampeg Reverberocket. However, none of the new leads colors' match up to either of the GS-12R schematics I have (or the original, for that matter). I've got the AC figured out, but am left with five:

* 2 green (6.3V filaments?)
* A green/yellow (?)
* 2 red (B+ I assume?)

Can anyone help me identify those? Thanks!!

David

[52 Bill]

* 2 green (6.3V filaments?)
* A green/yellow (?)
* 2 red (B+ I assume?)

Can anyone help me identify those?

The 2 greens should be the 6.3 volt filaments and the green yellow the center tap. You could check this with an ohmmeter.

Yes the 2 red should be the high voltage secondary.

[obscure44]

Thanks! From the two schematics I have, it doesn't appear a center is used. Just insulate it and tuck it out of the way?