Summer Fund Drive:C'mon guys lets show some support! If this site has helped you an you haven't recently donated Include your username so I know whos donatingPlease consider making a donation. :)
finished it yesterday, sounds fine, but no vibrato What are the first things to check? I already swapped few tubes, tried Workman FS 1205, FS 1226 and Zenith 63-10281 varistors. Any help appreciated.
Thanks,
Dinko
Hi,
if the vibrato doesn't work either your osc tube is not working or the signal does not make it through.
If you have a scope you can check the osc waveform, if you don't, try to measure the DC voltage across the 270K osc anode resistor, the voltage should swing some in sync with the osc speed.
If the osc works, try to follow the signal path ( e.g. the vibrato cancel jack could be shorted to ground )...
Comment