Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Fender Pro 185 Footswitch / Reverb Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fender Pro 185 Footswitch / Reverb Problem

    Hi, I've got a Fender Pro 185 combo. I've picked up a secondhand 3 button footswitch but when I plug in the f/s, the boost and channel change buttons work, but it cuts the reverb out and the switch has no effect.

    I've looked in the f/s and it has a series of diodes. I've checked for dry joints and it's all ok.

    Does anyone have a schematic or any ideas as to how I can get the reverb going?

    Thanks

  • #2
    Footswicth

    Dumb question did you clean both of the jacks?

    Comment


    • #3
      Now sorted

      ... my eyesight isn't as good as my soldering.
      I went over all the joints with an iron this morning and it's now sorted. The jack plug had indeed needed a good clean too.

      Comment

      Working...
      X