I've got this Hiwatt korean custom 20 tube which
has 60 hz hum and some high static.
My repair person thinks it's the rectifier diodes and the power supply.
Any suggestions for a fix?
The schematic is nowhere to be found and they're telling me it's going to cost an arm and a leg without it to figure out what's going on.
When you turn the master up even with the gain low, the hum and noise go up like you wouldn't believe.
The transformers aren't at 90 degree angles either.
The laminates are facing out. Could that be part of the problem as well?
has 60 hz hum and some high static.
My repair person thinks it's the rectifier diodes and the power supply.
Any suggestions for a fix?
The schematic is nowhere to be found and they're telling me it's going to cost an arm and a leg without it to figure out what's going on.
When you turn the master up even with the gain low, the hum and noise go up like you wouldn't believe.
The transformers aren't at 90 degree angles either.
The laminates are facing out. Could that be part of the problem as well?
Comment