I'd like to have it to go with the amp but also to read about all the control functions. There are three push pull controls and I guess one is for a treble boost but not sure about the other two. I'd also like to know about the inputs in the back of the chassis.
What is a good source for parts. I've got the chassis out and it looks like a beer or two has been spilled around the input jacks and on the first four POTS. I'm going to clean them and ohm them out but if the parts are available, I'll replace the old parts to give it a good tune up.
Thanks
Dave
I was able to down load the schematic, although the schematic doesn't indicate what type of input jack is used for the A-B channel pedal. Can anyone tell me if the A-B switching pedal is a stereo input cable to the A-B input jack on the back of the chassis? The one I have is plastic and the threads are gone. I want to replace it with a good metal design input jack. I forget if I asked where you recommend I get POT of the amps from. I guess Yamaha would have them but if not, any suggestions?
Thanks
Dave
Thanks for the link. Do you have a link for the owners manual or the service manual?
Dave
Dave,
I dont have a scanned copy of the manual, but I do have paper copy. Not much service info, maybe just something on setting the bias. Let me know if you want a copy.
"In theory, there is no difference between theory and practice. In practice there is."
- Yogi Berra
Comment