Bassman reissue problem

[01redcobra]

I'm working on a Bassman reissue(not the LTD) that has a fixed bias. Had a bad power tube and replaced the pair. Checking the bias and it's down in the 28-29mv range. Checking further, I have -55 at C- and 485 at B+ (good as per the schematic I have) but the voltage at TP7 should be 257 and I have the same voltage as at B+(485). Is this a problem with the output tranny? I don't see anything else in that circuit that would affect that.
Thanks!

[Jazz P Bass]

Fender Bassman Reissue

Can you please supply a model number?
Post the schematic if you have it.
I do not know what Test Point 7 is.

[01redcobra]

The Model is: 59 Bassman. Link to the schematic is http://www.fender.com/support/amp_sc..._Schematic.pdf

Thanks!

[JoeM]

You're mixing the DC and AC. Anything in an oval is the AC level measured with the stated input signal. The voltages shown in rectangles or squares is DC.

[01redcobra]

Just label me "D" for dumb. Thanks