Hello to everyone. I just joined this forum. ![Smile](https://music-electronics-forum.com/core/images/smilies/smile.png)
Good to be here.![Big Grin](https://music-electronics-forum.com/core/images/smilies/biggrin.png)
My Crate Stealth GT50 doesn't have any Volume on Dst channel.
Plenty of volume through the clean channel, but just a whisper from the dist channel. Anybody know any things to try? I've already replaced the 3 12ax7's. Did not try replacing the 6v6's. I have spare sets of el34's and 6l6's, but no 6v6's and was not sure i could swap them. Makes me wonder why i would hear full volume through clean channel if the tubes were bad anyways.
I really just wanted to get this going as a back up while my Mark IV boogie is sent off for repair. Then it can serve as a main amp for my 15 year old step son who is just joining a band.
Any ideas would be appreciated.
![Smile](https://music-electronics-forum.com/core/images/smilies/smile.png)
Good to be here.
![Big Grin](https://music-electronics-forum.com/core/images/smilies/biggrin.png)
My Crate Stealth GT50 doesn't have any Volume on Dst channel.
Plenty of volume through the clean channel, but just a whisper from the dist channel. Anybody know any things to try? I've already replaced the 3 12ax7's. Did not try replacing the 6v6's. I have spare sets of el34's and 6l6's, but no 6v6's and was not sure i could swap them. Makes me wonder why i would hear full volume through clean channel if the tubes were bad anyways.
I really just wanted to get this going as a back up while my Mark IV boogie is sent off for repair. Then it can serve as a main amp for my 15 year old step son who is just joining a band.
Any ideas would be appreciated.
![Thumbs Up](https://music-electronics-forum.com/core/images/smilies/icon_tup.gif)
Comment