Fender Super 60 - how to get the board out?

[Albert Kreuzer]

Fender Super 60 has an annoying buzz which is not affected by any of the controls. Want to get the board out to do some search for open heater balance resistors etc. Preamp board comes out, the big board wants to stay in no matter what. Do I really have to disconnect ALL xfmr wires?
Any help appreciated.

Thanks,
Albert

[acorkos]

power tube socket screws

[Albert Kreuzer]

thanks, but I have them out already. Still can't tilt the board far enough to get to the parts.

Cheers,
Albert

[acorkos]

did you disconnect all the slide connectors on the transformer wires? any screws holding the pcb to the chassis standoffs? i'm not sure what else there is to hold the board down...