Hi Folks,
I'm working on a Crate CR-165B that wasn't working when I got it. The first thing I did was replace the IN5392 diodes in the power section with GP10M-002s. When I powered it up they disintegrated, so I started checking each part. I noticed that two parts numbers did not match what was on the layout. These were Q1,and Q2 which are showing as PN4249s, but the installed parts are 2N5087s. Would this cause an issue? I also found one suspect transistor listed as SJ4353, but have 2N3055s installed.
Any thoughts?
Thanks, Tom
I'm working on a Crate CR-165B that wasn't working when I got it. The first thing I did was replace the IN5392 diodes in the power section with GP10M-002s. When I powered it up they disintegrated, so I started checking each part. I noticed that two parts numbers did not match what was on the layout. These were Q1,and Q2 which are showing as PN4249s, but the installed parts are 2N5087s. Would this cause an issue? I also found one suspect transistor listed as SJ4353, but have 2N3055s installed.
Any thoughts?
Thanks, Tom
Comment