Mesa Solo 50 Head - Low-ish Output

[novoros1]

Mesa Single rect low volume.

Hi, I have the same problem with my single rectifier. I noticed when I took the relay RY4 out one of the leg was bend and not soldered. Is this the way the Mesa put that relay or just someone at the factory made mistake. This is a side B of RY4 where the Lead Master and RHY Master goes. I soldered the leg, the amp still sounds low but it seams I can't read the tube voltage now. Any help would be appreciated.

[novoros1]

OK, It was easy fix. Just replaced the TR J175 ( CH SW Mute) DONE !!!!!!!!! Hope it will save money and the time to someone with the same problem.
Novoros1