Piezo bridge and emg's???

[Musiclogic]

I've seen the LP piezo, but are there commercially available units that allow use of EMG pickups along with a simple piezo bridge. I can't seem to find any real answers to this.
Any help would be great.

[nashvillebill]

Nothing immediately comes to mind, there's plenty of piezo preamps around but I don't recall an EMG setup.

I'd make a simple JFET buffer and just mix it with the EMG preamp output using a blend pot, the blend pot would work like the Ovation VXT.

[Musiclogic]

this is probably the way to go, just hoping there was something available, customer is finicky, and not a fan of homebrew. Thanks though Bill, I really appreciate it.

[Phostenix]

Have you contacted Graphtech & asked them if their Ghost system will work with EMG's? I believe it will, but Morgan could tell you for sure.
Contact - Graph Tech

[Musiclogic]

yes, the Ghost system would work, but the customer wants the ABM bridge, and no response from them or Fishman yet on if their circuits will work with the ABM, looking more and more like homebrew solution. 3 mailings to EMG, and as usual, no response.