Please help me set up this Variac type unit I found. Where do the 115-120 volt ac inputs go?
There is a top wiper, and a bottom wiper (labelled #3) under it with 2 spade terminals sticking outboard.
There are double spade terminals on a block labelled from left to right as follows.
#2 - first position on lower winding.
space
#4 - second position on winding
#5 - third position on winding
#6 - fourth position on winding
#1 - upper position on beginning (or end) of winding
#7 - three spade connectors not connected to anything. Can be jumpered to bottom wiper or elsewhere.
Obviously, the various positions on the winding provide different fixed voltage outputs.
Thanks for your help. Please see Pictures included.
There is a top wiper, and a bottom wiper (labelled #3) under it with 2 spade terminals sticking outboard.
There are double spade terminals on a block labelled from left to right as follows.
#2 - first position on lower winding.
space
#4 - second position on winding
#5 - third position on winding
#6 - fourth position on winding
#1 - upper position on beginning (or end) of winding
#7 - three spade connectors not connected to anything. Can be jumpered to bottom wiper or elsewhere.
Obviously, the various positions on the winding provide different fixed voltage outputs.
Thanks for your help. Please see Pictures included.
Comment