73 Super Reverb RIZES from the dead

[Doc Stitches]

S0 ... here is the outcome on this project.....sweet, sweet sounds !!

1. wire "Y" from 220K resistor wired to wrong side of .01 cap to V4

2. wire "Z" from 10pF cap wired to wrong side of .02 Cap to V2

Excuse me while I wipe some more egg off my face...

Treble for Channel 2 is still not working.

Thanks to all for the help ....52 Bill, ( I am still working on the concepts ), pdf64,

Jazz P Bass, and others.

[überfuzz]

Then you owe us some pictures dude.

[Doc Stitches]

here come the pics.....I tried last night but...........cyberspace "ate" them.

View the SLIDE SHOW

Pictures by docjacobson - Photobucket

[52 Bill]

Doc: Don't overreact to my earlier remarks, I was only hoping that you would learn and understand why I said something was wrong, and not just take my word for it.

As for your treble control problem, is there a jumper connecting the 250pf cap to the junction of the two 100K resistors under the board? The normal channel has one on top of the board, but on the vibrato channel side it is not shown.