Peavey Classic 50 (older one from '93) with a suspect output transformer.
Primary windings measure ok. End to end is ~140 ohms... one end to center is ~65ohms and the other end to center is ~74 ohms.
Secondary seems to be a total short. The 8ohm winding to 16 ohm winding is totally shorted... 8ohm winding to common is ~0.2 ohms and 16phm winding to common is ~0.3 ohms.
Should the secondary of an OT measure as such or is it beat?
Primary windings measure ok. End to end is ~140 ohms... one end to center is ~65ohms and the other end to center is ~74 ohms.
Secondary seems to be a total short. The 8ohm winding to 16 ohm winding is totally shorted... 8ohm winding to common is ~0.2 ohms and 16phm winding to common is ~0.3 ohms.
Should the secondary of an OT measure as such or is it beat?
Comment