Not sure how to trouble-shoot this.
I inherited this amp. Everything seems to work, except for the Trem. I replaced the Trem tube (is it V3) and I measured the heater and plate voltages. Those numbers seem to be OK. I do not get any V3 cat voltage regardless of the foot switch or the tremolo knobs positions. I guess this amp has some kind of LDR. I took a picture of it. It is located over in the corner of the chassis behind that aluminum shield. I suppose that could be bad, but I have no idea.
Any of you guys have any idea what I should check in the Trem Circuit to try and get this working.?
Thank You
I have the head and it is marked YGL-3A Mk
Traynor_YGL-3_YGL-3A_MK_III.pdf
http://i111.photobucket.com/albums/n...orygl3a002.jpg
http://i111.photobucket.com/albums/n...orygl3a001.jpg
http://i111.photobucket.com/albums/n...orygl3a003.jpg
I inherited this amp. Everything seems to work, except for the Trem. I replaced the Trem tube (is it V3) and I measured the heater and plate voltages. Those numbers seem to be OK. I do not get any V3 cat voltage regardless of the foot switch or the tremolo knobs positions. I guess this amp has some kind of LDR. I took a picture of it. It is located over in the corner of the chassis behind that aluminum shield. I suppose that could be bad, but I have no idea.
Any of you guys have any idea what I should check in the Trem Circuit to try and get this working.?
Thank You
I have the head and it is marked YGL-3A Mk
Traynor_YGL-3_YGL-3A_MK_III.pdf
http://i111.photobucket.com/albums/n...orygl3a002.jpg
http://i111.photobucket.com/albums/n...orygl3a001.jpg
http://i111.photobucket.com/albums/n...orygl3a003.jpg
Comment