Quick Input Question

[crunchman]

I'm converting from a cliff type to a shorting switchcraft. I have the 1 meg resistor tied to all three tabs, the signal to the tip
and the ground from the shielded wire to the sleeve, Is this correct ?? Thanks

It appears the signal is shorting.

[soundguruman]

"I have the 1 meg resistor tied to all three tabs"
You should post a picture cause it's too hard too tell what you did.

[Jazz P Bass]

I'm converting from a cliff type to a shorting switchcraft.

There is absolutely no usefull information in this statement.
There are about 10 different jack configurations (roughly) that are used in amplifiers.
What amp are we talking about.

[Dave Mac Farlane]

Quick output answer - Get yer head tigether man!!!
(Joke)