Just curious: try to drive an 8 ohm speaker.
TDA2050 might be a little shy, current wise.
I also corrected my earlier post, one .1 capacitor should go from pin 5 (+B) to pin 3 (gnd); I typed (4) which is speaker out ...... although I stated correctly that it should be ground.
TDA2050 might be a little shy, current wise.
I also corrected my earlier post, one .1 capacitor should go from pin 5 (+B) to pin 3 (gnd); I typed (4) which is speaker out ...... although I stated correctly that it should be ground.
Comment