Tweet
Hello, I've been searching the forum and google for a similar issue and i have only found one person with a similar issue regarding a 333xl. My 6262 is switching from the lead channel to the clean channel at it's own discretion. I saw a similar issue being reported with a Bugera V22 and they state to put a heatsink on the 7815 regulator, I tried this and it didn't work so i went ahead and change the IC1 and IC2 position with new 7815 and 7915 regulators. I still have the same issue.
I am confident now after disassembling and soldering these two regulators i have the ability to fix this but i do not have the ability to fig out what is wrong. I am very disappointed in my efforts failing.
Please if you have any advice ideas on what to try i'm all ears, please help. I'm begging.
I have the schematics but i don't know how to properly understand them etc...
If anyone knows a repair shop in NY/long island that's good i would a appreciate that too. Thanks Gentlemen and Ladies.
The one member that had this issue with the 333xl never posted back what the fix was. I like when people report back with the solution but unfortunately this member did not.
http://music-electronics-forum.com/t29374/
I am confident now after disassembling and soldering these two regulators i have the ability to fix this but i do not have the ability to fig out what is wrong. I am very disappointed in my efforts failing.
Please if you have any advice ideas on what to try i'm all ears, please help. I'm begging.
I have the schematics but i don't know how to properly understand them etc...
If anyone knows a repair shop in NY/long island that's good i would a appreciate that too. Thanks Gentlemen and Ladies.
The one member that had this issue with the 333xl never posted back what the fix was. I like when people report back with the solution but unfortunately this member did not.
http://music-electronics-forum.com/t29374/