Marshall Connector Identification

[AmpFix]

I need to identify and source a couple of connectors used in Marshall amps like the Class 5 and the mode four.
What I need it the female connector that accepts the 22AWG wire on one end and slips onto the PCB pin on the other.
I went through the mouser and digikey catalog but didn't find anything.

[nosaj]

I need to identify and source a couple of connectors used in Marshall amps like the Class 5 and the mode four.
What I need it the female connector that accepts the 22AWG wire on one end and slips onto the PCB pin on the other.
I went through the mouser and digikey catalog but didn't find anything.

Try your local autoparts store for quick disconnects.

jason

[Jazz P Bass]

Or try Farnell.
Farnell United Kingdom | Electronic Components | Electronic Parts
It being an English amp , they may have something.

[Enzo]

Or modify something. You know the flat push-on connectors, like we push onto speaker terminals or on a lot of transformer leads. The female has rounded areas on the sides. Put one of those on your wire and shove that pc board post up into the round area of the push-on. Tighten or loosen as needed.

I bet I could take a female Molex 09 series pin and use it as well.

I mainly see the connector you photo in video monitors myself, and if I neede done I might go rummage through my arcade junk.

[AmpFix]

Apparently, when Marshall sells a replacement transformer, the connectors are already on them. They're not listed as a separate part.
The search continues.