Cornford hurricane schematic

[blindboybenton]

Hi all

Does anyone have a cornford hurricane schematic or know where i can down load one. I have one with a blown mains tx and i want to know the output voltages
It looks like i have to get a replacement from cornford in the usa. Looking to source one from the uk

BBB

[Prairie Dawg]

You can sort of figure it out from the ratings on the transformer. The one I see here has a 6.3v 3a winding-good-no low voltage to supply solid state stuff-better-and i can just barely miss seeing the hv rating.

I'm assuming that the high voltage winding is the one that's toasted.

Other than that it seems like a fairly simple setup, the ratings for a pair of EL84s are readily available and all you need to know is the real estate and the rating on the transformer. Then, a generic item could be sourced from any number of suppliers.

It's just another example of companies not supporting the product with technical information.

[bob p]

[bob p]

Looks like a generic AC15-type transformer should fit the bill.

[big_teee]

Looks like a generic AC15-type transformer should fit the bill.

Just Kidding here, but looks like a good time to rip out the EL84s, put in 8 pin sockets!
Put in A real transformer, and install EL34s!
T

[blindboybenton]

Many thanks chaps.. Ive found a uk supplier. who made the tx in the first place to make me another.. So that is that.. Anyone here have a make of EL84 that i should put in
In the amp are sovteks ( 2 yrs old ) I dont get too play around with el84 very often.. Dont say Rubys chaps as i cant get them here in the uk

BBB

[Prairie Dawg]

Rubys are either Shuguang or JJ. Either should be readily available in the UK

[Demonoid]

Last version of layout, with some corrections



Direct link - http://s13.postimg.org/6ytxxxt0l/Lay...hillidoggy.gif

[bob p]

Thanks. with the higher res version it's possible to actually read the parts values.

Got a schematic?

[Demonoid]

Thanks. with the higher res version it's possible to actually read the parts values.

Got a schematic?

Of course


just click one more time on the picture, it will be opened in the original size


Cheers,
Demonoid