Got a Weber style Fender 5E3 clone with around .6vdc on the end of a plugged in guitar cord causing the guitar pots to scratch.
The voltage is lower when loaded down/plugged into a guitar.
It's on both channels and all four inputs.
Each V1 cathode (pins 3 and 8) are grounded to the input jack ground for it's channel.
Think that's causing it?
I'm going to move the cathode grounds to another spot and try cleaning the chassis where the input jacks make contact.
Any other ideas what might be causing it?
The voltage is lower when loaded down/plugged into a guitar.
It's on both channels and all four inputs.
Each V1 cathode (pins 3 and 8) are grounded to the input jack ground for it's channel.
Think that's causing it?
I'm going to move the cathode grounds to another spot and try cleaning the chassis where the input jacks make contact.
Any other ideas what might be causing it?
Comment