newish Mesa DR

[Valvehead]

I have a 2010 Mesa dual recto , its the multi-watt version , dated 2010.

Does anyone know what the voltage should be at the output of the 4 , 1n4007 diodes ?

mine has 500 vdc , is that correct for this amp ?

Having a hard time getting a mesa tech on the phone

[The Dude]

There's a schematic HERE that has voltages. It should be the same or similar enough.

That voltage will obviously be higher with no load. Is your 500 measured out of standby with tubes installed?

[Valvehead]

ok.

everything is somewhat working--- thanks !