Cabinet for Deluxe Reverb AB763 Combo - Europe based supliers

[7xa12]

I would like to buy or build a cabinet for my homebrew Fender Deluxe. Do you know any guide/links how to build one?
I found one suplier in Germany ( TAD). 329 euros
I need your advice. Do I have any other options?
thanks

[Mick Bailey]

Where do you live? shipping cost across Europe can be high due to 'volumetric weight' being applied.

Options depend on whether you have woodworking skills, tools and a work area. Clamping up a cabinet this size needs plenty of sash or bar clamps (though I've used the Spanish Windlass technique for years). The other question is whether you're covering your cabinet yourself.

Also, cutting finger joints in birch ply needs a jig and table saw or router. Biscuit joints are successful if you put enough in and the butt joints are close fitting to begin with. You need to get hold of a dimensioned drawing as a start.

I've installed amps into quite a few cabinets from Mark Phillips;

Cab Photos 2 - AF Custom Cabinets

Some companies will sell their cabs as a flat-pack to reduce shipping costs.

[7xa12]

Thanks Mick for a good info as alwayes, I do not have impressive woodworking experience skills and right tools for the cutting at the moment .
I am in Ireland and shipping from USa can be expensive.
Is there any other Fender amp cabinet that would fit to ab763 deluxe chasis?
Is it good idea to buy solid state Fender just for cabinet? ( for example solid state Deluxe 90? or any other? )

[JoeM]

...<snip>
Is there any other Fender amp cabinet that would fit to ab763 deluxe chasis?
Is it good idea to buy solid state Fender just for cabinet? ( for example solid state Deluxe 90? or any other? )

Not that I'm aware of. The SS Fender Deluxe 90 (or 900) isnt the same size cabinet.