Got a Fender Vibrolux reissue that's very noisy/hissy. Noise increases as either channel volume or reverb is turned up.
Haven't cracked it open yet, just swapped in new preamp tubes with no change.
Of course removing phase inverter kills the noise so it's not in the power amp.
Anything I should look for specifcally or is this normal for these amps?
Thanks.
Haven't cracked it open yet, just swapped in new preamp tubes with no change.
Of course removing phase inverter kills the noise so it's not in the power amp.
Anything I should look for specifcally or is this normal for these amps?
Thanks.
Comment