Peavey KB300 pots

[blindboybenton]

Hi I have a KB300 with some broken pots. these are Stereo 50k pot with one shaft, But you can turn either 50k mono pot seperatly
Ive checked ebay and all the uk suppliers, does anyone know a source for these parts

I spoke to customer. He don't want me to mount one of the stereo pots on the back chassis, I think he's going to be out of luck
,


Jb

[gui_tarzan]

Have you tried contacting Peavey?

[blindboybenton]

forgot to put in post.. peavey don't have any or any replacments


thanks anyway

BBB

[Enzo]

Just a note, that is not one shaft, that is two shafts and it is called concentric shafts. One shaft would mean a single shaft turns both sections together. That might help your search - dual 50k concentric shaft.

And PV may no longer have them, but some shop might. I just looked, and I no longer have them, but there are a lot of shops. You might do better to ask for:

Peavey part number 71190556, 50kBx2 concentric shaft pot for KB300 1989 version.

See if anyone has one in their shop stock.

[olddawg]

50k concentric pots should not be difficult to find. One that will accept your knobs might be a bit more difficult to find. You might have to modify your knobs and use 5 minute epoxy.

[Jazz P Bass]

In the past, I have robbed the Channel X Reverb pot, installed a normal pot for the High Eq function & set the Reverb circuit at half way with resistors.

Clunky, but it works.

[blindboybenton]

Hi Jazz bass.. Ive said to the customer that i can remove the the stereo pot and fit a single then add a resistors. will see what he says

JB

[blindboybenton]

Thanks enzo.. Now i know what the full name is i will try another search

have a good day

JB

[audiopete]

Don't worry about those side brackets either. Good luck. Sometimes old pots are a real pain to match up.

[blindboybenton]

post now closed. Got some pots from Ebay. Not perfect looking ,

BBB

[Jazz P Bass]

Do you have a picture or a link to the part?

[blindboybenton]

HIGH QUALITY ALPHA STACKED DUAL CONCENTRIC POTENTIOMETER B50K POT/ DCP7 | eBay

[Jazz P Bass]

How was the fit of the Peavey knobs?

[blindboybenton]

I didn't even try them as i can see that the shafts are much too big. They did stick out a bit. I used some extra washers to pack out the inside of the chassis, so it only stuck out the min. Customer has happy just to get them work

BBB