Proper way to test a Power Transformer after an amp meltdown?

[Jazz P Bass]

Pin #3 is the OT connection to the B+.

38 ohms is good. (measurement is only for one side)

The OT output will always read very low resistance.
No matter what speaker load you have attached.

What are we testing for?

[Jonny toetags]

Pin #3 is the OT connection to the B+.

38 ohms is good. (measurement is only for one side)

The OT output will always read very low resistance.
No matter what speaker load you have attached.

What are we testing for?

I'm trying to see if the OT is still good.

[Chuck H]

I'm trying to see if the OT is still good.

Output Transformers