TrampTraceElliotPotentiometers

[hewo]

Ok let me look at the storage bottle and reply here.
I fill the eye medicine mini dropper bottle to quantify dispense.
Naptha can be added to yield desired anti-viscosity.
Never got elex contaminated, so must still research, who knows, beneficial inert scrubbers?

[J M Fahey]

Remember, if you ponder at what you read, it's because you've been indoctrinated to status quo.

Not really, quite the contrary.
Being fluent in 5 languages which to boot have wide regional variations makes me analyze grammatical construction and choice of vocabulary, that's why I was curious and asked in the first place.
But now I'm satisfied it's just affected language choice, for reasons unknown and anyway not my business, so wish you the best and here ends my quest and interest
At your service for any Tech doubt I might help with.

[drewl]

So certain are you.

Be not afraid, but you will be.....you will be.

[Leo_Gnardo]

A most intriguing and curious thread.

Yes! Big red can walmart four dollars fifty cents, kills centipede asphyxiation.

Is that the dry-lube spray? Sounds like good stuff, very affordable, extra points for being pesticide. Will snoop WalMart next time I go. I can see demising centipedes would be handy on the islands. Got big mean ones there.

Neighbors and their exhalations plus sewer gas sound like no fun zone, hope this will improve for you.

[hewo]

No!
Forum discussed CRC electrowash for pots.
My divulge of bicycle dry lube pot shafting snugging is another chemical realm altogether.
Clarification done.

[hewo]

PotShaftingSnugnessLube

I just want to know if this "bicycle chain lube" trick works, what the exact name of the product is, and where to buy it on line. Imhe, the only way to get that factory feel after a pot has been excessively cleaned is to disassemble it and lube the shaft with the thick grease they used in the first place.

it's called KryTec, the tiny bottle purchased over eight years ago bicycle shop.
it's called T9, the bulk bottle purchased 2 years ago bicycle shop.

i bought the prior for slm ecc83 tube shields vitron o-ring flanged compression slippage. this enables shield can bayonet twist and lock, as the o-ring on the flange displaces fitup slack meant to be done by the legacy tapered coil compression metal spring on glass bottle. the spring does harm to the pcb because the socket is mounted on pcb, so pcb receives this spring plunging force, and it will deflect, causing warpage, in proximity of plunged socket.