I have a Peavey xr600b with 400b/g board with one blown output transistor It is a sj6357.
I have 3 2n3442 TO-3 that I am wondering if would be suitable and 2 mj15001. What I've read from Enzo is since they work together I should replace all 3.
On that channel there were3 sj6357 and one mj15003. Going by the specs on the mj15003 the data is very similar except for current rating 20amps versus 10amps, plus the amp uses a 8 amp fuse so I think I'm safe there.
Thanks,
nosaj
http://www.onsemi.com/pub_link/Collateral/2N3442-D.PDF
http://www.onsemi.com/pub_link/Collateral/MJ15003-D.PDF400 BG module.pdf
I have 3 2n3442 TO-3 that I am wondering if would be suitable and 2 mj15001. What I've read from Enzo is since they work together I should replace all 3.
On that channel there were3 sj6357 and one mj15003. Going by the specs on the mj15003 the data is very similar except for current rating 20amps versus 10amps, plus the amp uses a 8 amp fuse so I think I'm safe there.
Thanks,
nosaj
http://www.onsemi.com/pub_link/Collateral/2N3442-D.PDF
http://www.onsemi.com/pub_link/Collateral/MJ15003-D.PDF400 BG module.pdf
Comment