Presonus 16.0.2 power supply -- d16 burned

[Jazz P Bass]

Please post the diode value.

[vierneedator]

Please post the diode value.

1N6267... can you also take a look at the value of U8 for me in return? Mine is busted needed to replace too. Thanks in advance

[yu-go]

I was trying to confirm 6.8 or 68 number on D16 diode. I see 1.5kE6.8

[g1]

1.5KE series is a transient clamping type diode. I agree it appears to be the 6.8A (breakdown volts) version.
Also, there is no 68 version so it must be 6.8

[yu-go]

Thank you for post the number, that clarified my doubt.

U8 number is: 2807-2

http://www.ti.com/lit/ds/slus163b/slus163b.pdf

R31 number is: 2001

[vierneedator]

Thank you for post the number, that clarified my doubt.

U8 number is: 2807-2

http://www.ti.com/lit/ds/slus163b/slus163b.pdf

R31 number is: 2001

1.5KE and 1N6267 are just the same TVS diode. I just fixed mine, thank you are right U8 is 2807-2, presonus customer support told me then.

[mashrum101]

hi everyone,

mine too is is burned out as well, sorry for my english.

i need the value for:

R16
R8

any help will be gladly appreciated.

[Mike_S]

R16, R8

hi everyone,

mine too is is burned out as well, sorry for my english.

i need the value for:

R16
R8

any help will be gladly appreciated.

I checked my board...,
R16 = 1 k
R8= 2,7 E

hope that helps,
greetings from Salzburg

[TimmyP1955]

If the supply does not run without a load, it could be part of the design - I've seen that in one particular supply type.

[doctor]

The D2 is the MBR2045CT.
The D16 is the 1.5KE6.8A.

[alansombr]

hello
send value

R13
D13
Q1