Tweet
Ok here's where I'm at. I only have -1v on the -vb supply. The +vb is 44v.
With the PA disconnected I have:
-vb = -41v
+vb = +44v
What do ya'll think is the likely culprit? And is there a way to make Q10/05 work so I can test voltages around them, chunking things, without the PA connected?
With the PA disconnected I have:
-vb = -41v
+vb = +44v
What do ya'll think is the likely culprit? And is there a way to make Q10/05 work so I can test voltages around them, chunking things, without the PA connected?
Comment