Hello:
I have a Crown UT2020 = CE2000 that has no output on both channels but no fault LEDS on, amp cycles to turn on power LED and with signal applied signal LED turn on and blinks. Actually on channel 2 can barely hear some output not affected by volume pot. Board PWA 137557-3. Date of production 0055=5 of 2005? Any suggestions on repair.
Thanks in advance
Nicolas
PS: Here the schematic etc
http://elektrotanya.com/crown_ce1000.../download.html
I have a Crown UT2020 = CE2000 that has no output on both channels but no fault LEDS on, amp cycles to turn on power LED and with signal applied signal LED turn on and blinks. Actually on channel 2 can barely hear some output not affected by volume pot. Board PWA 137557-3. Date of production 0055=5 of 2005? Any suggestions on repair.
Thanks in advance
Nicolas
PS: Here the schematic etc
http://elektrotanya.com/crown_ce1000.../download.html
Comment