I bought a new Hiwatt Studio Stage Head, and a 4*12 Hiwatt Cab which arrived this week.
I could not get a sound of the setup, and figured I had tube problems from the amp being shipped to me, but when I took it in to a shop to make sure, we hooked the head up to one of the store's cabs and the head worked fine.
So I went back home, took the back off the speaker cab, and all the wiring looks solid. Still not a sound though. The cab is 16 ohms and the head is set at 16 ohms. Someone suggested the cab might have been wired wrong, etc.....how do I get to the bottom of this?
Thanks!
Tom
I could not get a sound of the setup, and figured I had tube problems from the amp being shipped to me, but when I took it in to a shop to make sure, we hooked the head up to one of the store's cabs and the head worked fine.
So I went back home, took the back off the speaker cab, and all the wiring looks solid. Still not a sound though. The cab is 16 ohms and the head is set at 16 ohms. Someone suggested the cab might have been wired wrong, etc.....how do I get to the bottom of this?
Thanks!
Tom
Comment