Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Peavey VTM 60

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Enzo View Post
    Yes, pull the power tubes and measure the voltages in the sockets, in particular the bias on pin 5 of each.
    Thank you sir... Once again, your ninja skills come through! It was indeed the bias... I measured 0 volts D.C. on pin 5... Checked the 1/4 amp fuse... yeah... it measured 300K ohms.. lol! Changed that and all is well... I do appreciate everybody's help and input... I really do... This is pretty much the best forum on the net in my humble opinion...

    Comment

    Working...
    X