Peavey Deuce automixer four switch pedal.

[Robgil]

I am replacing the old wiring in mine, a previous owner rewired it and its a bit shoddy
. I have had the casing powder coated, do the switches all earth through the casing? Will I need to remove the powder coating where the switches contact the casing?

[Justin Thomas]

If it's for a Deuce VT, I can check mine for you...

Justin

[Robgil]

If it's for a Deuce VT, I can check mine for you...

Justin

It is, would it be possible to load a photo of the internals?

[Justin Thomas]

No, my laptop is ruined, but I can give a good verbal description if ya want it...

Justin

[Jazz P Bass]

I am replacing the old wiring in mine, a previous owner rewired it and its a bit shoddy
. I have had the casing powder coated, do the switches all earth through the casing? Will I need to remove the powder coating where the switches contact the casing?

The switches themselves do not need to contact the metal.

[Robgil]

No, my laptop is ruined, but I can give a good verbal description if ya want it...

Justin

I will upload a photo of mine.

[Robgil]

The switches themselves do not need to contact the metal.

On my pedal the switch for the phaser has a washer with a tag, an earth is soldered to that tag. this wore runs across every switch except the selector switch.