Peavey PFC-3 Footswitch (for Peavey Transtube 112 EFX)

[Johnrcurry]

I am hoping to fashion a PFC-3 footswitch for a Transtube 112 EFX. I have obtained a wiring diagram of the footswitch, but it does not tell me whether the 4 switches themselves are momentary, latching or some combination of the two. Can anyone here tell me? I've attached a copy of the drawing of the footswitch that I have.

Thanks

[g1]

The drawing does not indicate. Please post the amp schematic.

[Enzo]

They pretty much have to be momentary. Otherwise you could turn on two channels at once. The manual says things like "double-click switch 2 to store setting". No one double clicks latching switches.

[Johnrcurry]

g1, thanks for your reply. Here's the schematic. . .

[Johnrcurry]

Thanks. Enzo. That makes sense.

[Johnrcurry]

Closing the loop on this. . . I acquired an actual Peavey PFC-3 footswitch and learned that all four switches are the latching type.

[Enzo]

Sorry for my bad advice then.