Types of Fuses?

[jhares0311]

I blew the fuse in my Peavey Valveking 212 due to bad tubes. They are about year old and were starting to experience the issues associated with tubes going out: low volume, no umph, etc.

The new tubes are on the way so I took the fuse out of the back and now need to know what kind of fuse I need to replace the old one with. The original was a ceramic 5A, but can I use a glass one, and what type, fast burn or slow burn?

Any help would be greatly appreciated.

[Enzo]

It does not have to be ceramic, and it is fast blow. if it does not specifically say slow blow, assume fast blow. SHould be printed near the fuse holder.

[jhares0311]

Thank you for your help.