Question on a power supply

[nosaj]

Not sure how I'd mount it. Here's some pics of board and heatsink. Put an apple phone charger on board for size reference.
nosaj[ATTACH=CONFIG]54355[/ATTACH][ATTACH=CONFIG]54356[/ATTACH]

Some reason I was thinking t03 instead of to220. i found this regulator L78S05CV and do 2amps.

nosaj

[The Dude]

Just pay attention to the basing diagram.

[nosaj]

Just pay attention to the basing diagram.

Yea i pulled those up, flying leads it will be.

nosaj

[g1]

While you're in there, how's that ni-cad holding up?
Used to be we would disconnect the charging circuit and put a lithium coin cell in when they needed replacing.

[nosaj]

While you're in there, how's that ni-cad holding up?
Used to be we would disconnect the charging circuit and put a lithium coin cell in when they needed replacing.

That is actually a lithium, but since organ was made around 85-88 I intended on changing it anyways just to prevent a leakage.

nosaj