switch for a carvin V3 head

[nosaj]

Got a carvin V3 head to replace a b1m pot which I found the right one at mouser. But the switch seems to be a little harder to find if anyone could help.

Thanks,
nosaj

schematic http://carvinimages.com/schematics/v3m_blocked.pdf

pic red object is the back of the switch

[g1]

What is the switch function and where is it on the schematic?

[nosaj]

What is the switch function and where is it on the schematic?

s10 bottom left of schematic

nosaj

[g1]

Ok, but the board looks like it says S4 there?

Maybe one of these:

[nosaj]

Ok, but the board looks like it says S4 there?

Maybe one of these:

S10 is over to the right under input jack. s4 looks the same from the backside.

I'll look. Thanks,
nosaj

[nosaj]

S10 is over to the right under input jack. s4 looks the same from the backside.

I'll look. Thanks,
nosaj

Ok no one has the carling but using the data you provided I did find Grayhill and I did find what will work.
https://www.mouser.com/ProductDetail/706-34ADP12B4M7GTThe mouser pic is not correct but using that datasheet I confirmed it is what is needed.

Thanks G1!!

nosaj

[g1]

I was just going to say that Grayhill seems to be where the stock is at.
Here's the datasheet for the Grayhill 34A series if anyone should need (34B series similar but with plastic bushing):

[nosaj]

Ok no one has the carling but using the data you provided I did find Grayhill and I did find what will work.
https://www.mouser.com/ProductDetail/706-34ADP12B4M7GTThe mouser pic is not correct but using that datasheet I confirmed it is what is needed.

Thanks G1!!

nosaj

This part looks exact, the bat is the same lenght looks identical to the others in the amp.
nosaj