Princeton Reverb w/boost layout?

[drewl]

Anyone have a layout for the 70's Princeton Reverb w/pull boost or know if one exists?

Not the one with several pull pots, just the boost pull on the volume pot.

Restoring one that was hacked up back to stock, and I want the board to look right.

If no layout exists I can work it out with pics.

Thanks, this one here:

[Pedro Vecino]

Can it be this?

http://i.imgur.com/kBLtLhG.gif

EDIT: I'm sorry, I thought I was asking about the schematic

[drewl]

Man, been scanning the deepest darkest corners of the net for a decent pic of this amp.

Fender has a layout drawing for the Princeton II, with three pull boost pots, but not this one.

[g1]

Not much here but did you see this pic? http://k1xh.smugmug.com/Photography/...SCN0771-XL.jpg

[drewl]

Yes I did, thanks.

I had found a little better shot, just need to find it again.

It's nothing major, but it showed which resistors are on the switch so I can have it look close to stock.

Thanks.

[vintagekiki]

About Fender Princeton Reverb

Not much here but did you see this pic? http://k1xh.smugmug.com/Photography/Princeton-Reverb-Rebuild/i-b9vNcCT/0/XL/DSCN0771-XL.jpg

See more



https://www.tdpri.com/threads/princeton-reverb-w-pull-boost.609239/
Princeton Reverb w/ Pull boost

https://www.tdpri.com/attachments/princeton_rev_boostpedal-pdf.375760/
http://schems.com/bmampscom/fender/princeton_rev_boostpedal.pdf
Princeton Reverb with boost pedal schematics 014875

http://www.marshallforum.com/threads/1977-fender-princeton-reverb-rebuild.42918/
1977 Fender Princeton Reverb Rebuild

http://offsetguitars.com/forums/viewtopic.php?f=10&t=112616
The comprehensive PRINCETON thread

https://www.spearfoot.net/sfpr/
K & L Tube Works : 1973 Fender Princeton Reverb

https://www.thegearpage.net/board/index.php?threads/nad-princeton-reverb-with-pull-boost-got-info.1739881/
NAD: Princeton Reverb with Pull Boost - Got Info?

http://fenderguru.com/amps/princeton-reverb/
BF/SF Princeton Reverb

[drewl]

Thanks.

That's the one I found before.

Got it all wired up back to stock sounding great.

Thanks again.

[Justin Thomas]

Unfortunately, after about 1971 or 1972 I think Fender quit issuing layout diagrams, at least til the Rivera models came out. Thr last layout I remember seeing, chronologically, was the Bantam Bass or something like that...

I went through this with a 75 Bassman 50 that had a thuddy attack & otjer issues; it had bren hacked beyond repair & so needed a total rebuild. I was trying to figure out the ground layout for the Master without doing all of it by trial & error. Eventually I found an original gut shot...

Jusrin