Tweet
I just bought an old Gibson Mercury head, and it seems to have a couple things i want to tweak. First off, its a very clean amp with basically no breakup. ive attached the schematic for this amp, any ideas on how
to bring out some more gain? Also, Channel 1 has about half the output of Channel 2, maybe some leakage somewhere? But when i turn the treble up all the way on the first channel, i get what appears to be full volume. I did some research and its supposed to put out 35 Watts, but I had a little 12 watter before this and its hardly louder, just more low end and stuff so it appears louder.
P.S. Now I know why people who sell amps make it known that their amp sat in a smoke-free room. this thing reeks!
to bring out some more gain? Also, Channel 1 has about half the output of Channel 2, maybe some leakage somewhere? But when i turn the treble up all the way on the first channel, i get what appears to be full volume. I did some research and its supposed to put out 35 Watts, but I had a little 12 watter before this and its hardly louder, just more low end and stuff so it appears louder.
P.S. Now I know why people who sell amps make it known that their amp sat in a smoke-free room. this thing reeks!
Comment