And from yesterday:
I love it when circuit analysis combines with meter readings to pinpoint the problem.
Glad you found the trouble.
There is a note on the schematic that R45 is selected for no AGC actiion at 18v output into a 2 ohm load, and AGC does turn on by 19v.
COmpressor? Sure. It lets the signal get only so large, then the larger it gets, the more it shuts down the input. is ther a linear area in this response or is it just on off at some lever? I have no idea, you tell us from how your amp works.
And your English is flawless, certainly better than my Swedish. The only Swedish word I know is Volvo. Plenty of native English speakers use wrong terms all the time too.
I wonder if R44,R45 is open, or not connected to +90 somehow.
Glad you found the trouble.
There is a note on the schematic that R45 is selected for no AGC actiion at 18v output into a 2 ohm load, and AGC does turn on by 19v.
COmpressor? Sure. It lets the signal get only so large, then the larger it gets, the more it shuts down the input. is ther a linear area in this response or is it just on off at some lever? I have no idea, you tell us from how your amp works.
And your English is flawless, certainly better than my Swedish. The only Swedish word I know is Volvo. Plenty of native English speakers use wrong terms all the time too.
Comment