Announcement

Collapse
No announcement yet.

No sound from Silvertone amp head

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No sound from Silvertone amp head

    Hi,
    I've been using a silvertone twin 12 model 1484 guitar amp and cabinet for about six months but yesterday when I powered it up I can not get any sound out of it. All tubes light up but no sound. What can I do to trouble shoot the problem!
    Thanks for any help.

  • #2
    There is good troubleshooting information at "The Tube Amp Debugging Page" at http://www.geofex.com/ampdbug/ampdebug.htm
    You can start there and then ask futher questions here if needed.
    Good Luck,
    Tom

    Comment


    • #3
      Originally posted by Tom Phillips View Post
      There is good troubleshooting information at "The Tube Amp Debugging Page" at http://www.geofex.com/ampdbug/ampdebug.htm
      You can start there and then ask futher questions here if needed.
      Good Luck,
      Tom
      thanks tom, i'll check it out and get back to you with any other questions.
      Dave

      Comment


      • #4
        Originally posted by Tom Phillips View Post
        There is good troubleshooting information at "The Tube Amp Debugging Page" at http://www.geofex.com/ampdbug/ampdebug.htm
        You can start there and then ask futher questions here if needed.
        Good Luck,
        Tom
        I'm also wondering if there is a site I can get a wiring diagram for this Silvertone 1484 amp?? I'm a little nervous about sticking my hands inside when I'm not sure what anything is.

        Comment


        • #5
          Dave,
          I've never seen a wiring diagram / layout but you can find a schematic at http://www.schematicheaven.com (look under bargan bin amps)
          Tom

          Comment


          • #6
            thanks Tom!!

            Comment

            Working...
            X