This last month I've successfully finished repairing a couple of Marshall amps , a VS65 & a VS100R - two more to go , today I'm attempting to fix another VS100 that has crackling issues (had this before on a different amp)
Got a couple of questions :
**In the Pot image - the pins that have the red circles , are they grounds?? Would poor soldering with lifted pads cause noise issues with these pins?
**Clearly the 4 middle pads are all slightly lifted (should I leave them?) , and the external ones are missing - What's your take on fixing this?
Got a couple of questions :
**In the Pot image - the pins that have the red circles , are they grounds?? Would poor soldering with lifted pads cause noise issues with these pins?
**Clearly the 4 middle pads are all slightly lifted (should I leave them?) , and the external ones are missing - What's your take on fixing this?
Comment