Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Filter cap brand

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Filter cap brand

    Hi I'm recapping a fender stage 1600 filter caps what brand do people recommend i'm UK based.

    Caps allready in were samyoung kmh 3300uf 63v 105c clip in type ideally Farnell digikey rs! Or uk supplier. Cheers
    Tags: None
  • #2
    If I had to use Electrolytic caps (and in this case you do), I would look at Panasonic and Nichicon brand electrolytic caps.
    Panasonic ECO-S1JA332BA are spec'd at 3300µF/63V (20%) (22 X 50mm) • Snap-In • 10mm pitch • 0.09 Ohm ESR, 2500mA ripple current, with a life expectancy of 3000h @ 105°C.
    Tough to complain about that.
    If I have a 50% chance of guessing the right answer, I guess wrong 80% of the time.

    Comment

    • #3
      https://uk.rs-online.com/web/p/alumi...itors/1450330/
      https://uk.rs-online.com/web/p/alumi...itors/1713277/
      https://uk.rs-online.com/web/p/alumi...itors/7441253/
      Farnel is down at present, Mouser may have similar
      Any will be OK.
      Never replace them unless they are faulty or leaking as it is a waste of time and money.
      Support for Fender, Laney, Marshall, Mesa, VOX and many more. https://jonsnell.co.uk
      If you can't fix it, I probably can.

      Comment

      • #4
        Thanks for the advice guys i'm sorted now.

        Comment

        Previous template Next
        Working...
        X