Tweet
Originally posted by ca7922303
View Post
-
Look at the schematic what the value should be.
It's All Over Now -
"Look up the part # of the relay and download the datasheet."
It would help if we new the pinout of the relay.
What you have posted is of no help to anyone.
Try to keep in mind that the art of repairing involves lots of data.
And a sound reasoning of how the circuits function together.Comment
-
After looking at the data sheet on the relay, I'm wondering why I have no continuity on the two pins that are connected by the induction symbol?Comment
-
Also, I do not hear any nouse with my ear up to speaker after relay click.Comment
-
Noise*Comment
-
-
What do you mean by continuity? If your meter has a continuity function, you should use resistance range instead, and post the actual readings. According to the datasheet, the coil for the 24V version of that relay is 1100 ohms.Originally posted by ca7922303 View Post
If you hear a click, and you are sure it is from the relay, then the coil part of it is working. But the switch contacts may not be closing. That is why vintagekiki said to replace the relay.
In one of your other threads, Jon Snell talked about using an audio probe. If you had one you can hear if the signal is getting to the relay.
relay datasheet attached.Originally posted by Enzo
Comment
-
This guy is not helping anybody with his worthless posts.
troll????Comment
-
The suggestion is to use what you have.Originally posted by ca7922303 View Post
Upload what you see on the oscilloscope.It's All Over NowComment
-
Welcome to the machine.Originally posted by Jazz P Bass View Post
We already have one, he is a regular guest at the swedish table. Constantly looking for something, gives nothing, comment nothing, himself doesn't know what he wants.
https://music-electronics-forum.com/forum/schematic-requests/51333-behringer-ultra-di100-schematic-needed?p=914567#post914567
https://music-electronics-forum.com/forum/schematic-requests/51455-mackie-srm450-v3-schematic-request?p=786858#post786858
https://music-electronics-forum.com/forum/schematic-requests/910969-need-help-schematic-for-mackie-srm450-v3?p=910986#post910986
https://music-electronics-forum.com/forum/schematic-requests/926415-need-schematic-for-fender-mustang-3-v2?p=926483#post926483
So is this one. "fires" the questions and enjoys checking our knowledge and patience.
In 2 weeks he opened 8 different threads in which he fixes something. Judging by his comments, from experience he have only good will.
https://music-electronics-forum.com/forum/amplification/guitar-amps/maintenance-troubleshooting-repair/928711-fender-fm15dsp-no-output?p=928747#post928747
Originally posted by vintagekiki View PostIt's All Over NowComment
-
Sorry, what is a "swedish table" and what does it mean in this context?- Own Opinions Only -Comment
-
About the "swedish table"
https://en.wikipedia.org/wiki/Sm%C3%B6rg%C3%A5sbord
https://music-electronics-forum.com/forum/schematic-requests/926415-need-schematic-for-fender-mustang-3-v2?p=926442#post926442
"swedish table" in this context means choice within
https://music-electronics-forum.com/forum/schematic-requests
I'm really sorry for my simplified way of communicating.
I guess you know that translation is by means of a translation machine.
Sorry again
It's All Over NowComment
-
1.065 k resistanceComment
-
1,065 k resistance value is from what ???Originally posted by ca7922303 View Post
If you expect help in any form, you have to be concrete and cooperative.It's All Over NowComment
-
The coil of relay ry201.Comment
Comment