Announcement

Collapse
No announcement yet.

Simple Microphony sensor for valves (tubes)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by 35L6 View Post
    Don't caps and transistors make noise when you tap on them ?
    Capacitors can, depending on their placement and type, transistors are generally quiet unless damaged.
    Support for Fender, Laney, Marshall, Mesa, VOX and many more. https://jonsnell.co.uk
    If you can't fix it, I probably can.

    Comment


    • #17
      Caps can be noisy like that but mostly not. I'd say ceramic disc caps are most likely to get that way, but not always certainly. And if a disc were one of the feedback caps in a trem oscillator, who cares if it is a little microphonic? Semiconductors? I am surprised if I run into one of those that react to mechanical.
      Education is what you're left with after you have forgotten what you have learned.

      Comment


      • #18
        Originally posted by 35L6 View Post
        Don't caps and transistors make noise when you tap on them ?
        Disc caps, definitely. Especially cheap old ones. Larger values, too, say the .01 to .1 uF you find in funky old amps & even Fenders in the 60's & 70's. Film caps, if there's enough gain in following stages you'll hear them respond if tapped with a hard probe like screwdriver tip. Transistors? So rare I've seen/heard it only a handful of times. More like half a handful, 3 or so in 50+ years.
        This isn't the future I signed up for.

        Comment


        • #19
          Preamp Tube Tester and Power Amp Driver
          http://priceamp.dotster.com/diypreamp.htm
          Schematic
          Concept
          It's All Over Now

          Comment

          Working...
          X