Hi, all.
Happy Monday. I'm almost finished debugging a customer's 6G2 clone and am down to two remaining issues:
1. Buzz when volume at 0 - 2 + tone at 0-9
2. Non functioning trem
My main concern is issue #1 at the moment. I found and corrected a host of assembly errors and now the amp is nearly silent, save a little hiss at volume, but there's buzz aplenty when the conditions of #1 are met. I can nearly silence it by touching V1B's grid wire with my finger. After running shielded cable here, no improvement was noted. Layout is mainly old school fender with a hoffman ground scheme at the pots. All tubes good. Issue disappears with V1 pulled.
TIA
Happy Monday. I'm almost finished debugging a customer's 6G2 clone and am down to two remaining issues:
1. Buzz when volume at 0 - 2 + tone at 0-9
2. Non functioning trem
My main concern is issue #1 at the moment. I found and corrected a host of assembly errors and now the amp is nearly silent, save a little hiss at volume, but there's buzz aplenty when the conditions of #1 are met. I can nearly silence it by touching V1B's grid wire with my finger. After running shielded cable here, no improvement was noted. Layout is mainly old school fender with a hoffman ground scheme at the pots. All tubes good. Issue disappears with V1 pulled.
TIA
Comment